anvil::eth::error

Enum InvalidTransactionError

Source 
pub enum InvalidTransactionError {

Show 28 variants    NonceTooLow,
    NonceTooHigh,
    NonceMaxValue,
    InsufficientFundsForTransfer,
    MaxInitCodeSizeExceeded,
    InsufficientFunds,
    GasUintOverflow,
    GasTooLow,
    GasTooHigh(ErrDetail),
    TipAboveFeeCap,
    FeeCapTooLow,
    BasicOutOfGas(u128),
    Revert(Option<Bytes>),
    SenderNoEOA,
    InvalidChainId,
    IncompatibleEIP155,
    AccessListNotSupported,
    BlobFeeCapTooLow,
    BlobVersionedHashesNotSupported,
    MaxFeePerBlobGasNotSupported,
    NoBlobHashes,
    TooManyBlobs(usize),
    BlobTransactionValidationError(BlobTransactionValidationError),
    BlobCreateTransaction,
    BlobVersionNotSupported,
    EmptyBlobs,
    AuthorizationListNotSupported,
    Revm(InvalidTransaction),

}
Expand description

An error due to invalid transaction

Variants§

§

NonceTooLow

returned if the nonce of a transaction is lower than the one present in the local chain.

§

NonceTooHigh

returned if the nonce of a transaction is higher than the next one expected based on the local chain.

§

NonceMaxValue

Returned if the nonce of a transaction is too high Incrementing the nonce would lead to invalid state (overflow)

§

InsufficientFundsForTransfer

thrown if the transaction sender doesn’t have enough funds for a transfer

§

MaxInitCodeSizeExceeded

thrown if creation transaction provides the init code bigger than init code size limit.

§

InsufficientFunds

Represents the inability to cover max cost + value (account balance too low).

§

GasUintOverflow

Thrown when calculating gas usage

§

GasTooLow

returned if the transaction is specified to use less gas than required to start the invocation.

§

GasTooHigh(ErrDetail)

returned if the transaction gas exceeds the limit

§

TipAboveFeeCap

Thrown to ensure no one is able to specify a transaction with a tip higher than the total fee cap.

§

FeeCapTooLow

Thrown post London if the transaction’s fee is less than the base fee of the block

§

BasicOutOfGas(u128)

Thrown during estimate if caller has insufficient funds to cover the tx.

§

Revert(Option<Bytes>)

Thrown if executing a transaction failed during estimate/call

§

SenderNoEOA

Thrown if the sender of a transaction is a contract.

§

InvalidChainId

Thrown when a tx was signed with a different chain_id

§

IncompatibleEIP155

Thrown when a legacy tx was signed for a different chain

§

AccessListNotSupported

Thrown when an access list is used before the berlin hard fork.

§

BlobFeeCapTooLow

Thrown when the block’s blob_gas_price is greater than tx-specified max_fee_per_blob_gas after Cancun.

§

BlobVersionedHashesNotSupported

Thrown when we receive a tx with blob_versioned_hashes and we’re not on the Cancun hard fork.

§

MaxFeePerBlobGasNotSupported

Thrown when max_fee_per_blob_gas is not supported for blocks before the Cancun hardfork.

§

NoBlobHashes

Thrown when there are no blob_hashes in the transaction, and it is an EIP-4844 tx.

§

TooManyBlobs(usize)

§

BlobTransactionValidationError(BlobTransactionValidationError)

Thrown when there’s a blob validation error

§

BlobCreateTransaction

Thrown when Blob transaction is a create transaction. to must be present.

§

BlobVersionNotSupported

Thrown when Blob transaction contains a versioned hash with an incorrect version.

§

EmptyBlobs

Thrown when there are no blob_hashes in the transaction.

§

AuthorizationListNotSupported

Thrown when an access list is used before the berlin hard fork.

§

Revm(InvalidTransaction)

Forwards error from the revm

Trait Implementations§

Source§

impl Debug for InvalidTransactionError

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Display for InvalidTransactionError

Source§

fn fmt(&self, __formatter: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Error for InvalidTransactionError

Source§

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any. Read more
1.0.0 · Source§

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()
Read more
1.0.0 · Source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting
Source§

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)
Provides type-based access to context intended for error reports. Read more
Source§

impl From<BlobTransactionValidationError> for InvalidTransactionError

Source§

fn from(source: BlobTransactionValidationError) -> Self

Converts to this type from the input type.
Source§

impl From<InvalidTransaction> for InvalidTransactionError

Source§

fn from(err: InvalidTransaction) -> Self

Converts to this type from the input type.
Source§

impl From<InvalidTransactionError> for BlockchainError

Source§

fn from(source: InvalidTransactionError) -> Self

Converts to this type from the input type.

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T, R> CollectAndApply<T, R> for T

§

fn collect_and_apply<I, F>(iter: I, f: F) -> R
where I: Iterator<Item = T>, F: FnOnce(&[T]) -> R,

Equivalent to f(&iter.collect::<Vec<_>>()).

§

type Output = R

§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> ErrorExt for T
where T: Error,

§

fn abi_encode_revert(&self) -> Bytes

ABI-encodes the error using Revert(string).
§

impl<T> Fmt for T
where T: Display,

§

fn fg<C>(self, color: C) -> Foreground<Self>
where C: Into<Option<Color>>, Self: Display,

Give this value the specified foreground colour.
§

fn bg<C>(self, color: C) -> Background<Self>
where C: Into<Option<Color>>, Self: Display,

Give this value the specified background colour.
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
§

impl<E> InstrumentError for E
where TracedError<E>: From<E>,

§

type Instrumented = TracedError<E>

The type of the wrapped error after instrumentation
§

fn in_current_span(self) -> <E as InstrumentError>::Instrumented

Instrument an Error by bundling it with a SpanTrace Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<T> IntoRequest<T> for T

Source§

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request
§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
§

impl<D> OwoColorize for D

§

fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>
where C: Color,

Set the foreground color generically Read more
§

fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>
where C: Color,

Set the background color generically. Read more
§

fn black<'a>(&'a self) -> FgColorDisplay<'a, Black, Self>

Change the foreground color to black
§

fn on_black<'a>(&'a self) -> BgColorDisplay<'a, Black, Self>

Change the background color to black
§

fn red<'a>(&'a self) -> FgColorDisplay<'a, Red, Self>

Change the foreground color to red
§

fn on_red<'a>(&'a self) -> BgColorDisplay<'a, Red, Self>

Change the background color to red
§

fn green<'a>(&'a self) -> FgColorDisplay<'a, Green, Self>

Change the foreground color to green
§

fn on_green<'a>(&'a self) -> BgColorDisplay<'a, Green, Self>

Change the background color to green
§

fn yellow<'a>(&'a self) -> FgColorDisplay<'a, Yellow, Self>

Change the foreground color to yellow
§

fn on_yellow<'a>(&'a self) -> BgColorDisplay<'a, Yellow, Self>

Change the background color to yellow
§

fn blue<'a>(&'a self) -> FgColorDisplay<'a, Blue, Self>

Change the foreground color to blue
§

fn on_blue<'a>(&'a self) -> BgColorDisplay<'a, Blue, Self>

Change the background color to blue
§

fn magenta<'a>(&'a self) -> FgColorDisplay<'a, Magenta, Self>

Change the foreground color to magenta
§

fn on_magenta<'a>(&'a self) -> BgColorDisplay<'a, Magenta, Self>

Change the background color to magenta
§

fn purple<'a>(&'a self) -> FgColorDisplay<'a, Magenta, Self>

Change the foreground color to purple
§

fn on_purple<'a>(&'a self) -> BgColorDisplay<'a, Magenta, Self>

Change the background color to purple
§

fn cyan<'a>(&'a self) -> FgColorDisplay<'a, Cyan, Self>

Change the foreground color to cyan
§

fn on_cyan<'a>(&'a self) -> BgColorDisplay<'a, Cyan, Self>

Change the background color to cyan
§

fn white<'a>(&'a self) -> FgColorDisplay<'a, White, Self>

Change the foreground color to white
§

fn on_white<'a>(&'a self) -> BgColorDisplay<'a, White, Self>

Change the background color to white
§

fn default_color<'a>(&'a self) -> FgColorDisplay<'a, Default, Self>

Change the foreground color to the terminal default
§

fn on_default_color<'a>(&'a self) -> BgColorDisplay<'a, Default, Self>

Change the background color to the terminal default
§

fn bright_black<'a>(&'a self) -> FgColorDisplay<'a, BrightBlack, Self>

Change the foreground color to bright black
§

fn on_bright_black<'a>(&'a self) -> BgColorDisplay<'a, BrightBlack, Self>

Change the background color to bright black
§

fn bright_red<'a>(&'a self) -> FgColorDisplay<'a, BrightRed, Self>

Change the foreground color to bright red
§

fn on_bright_red<'a>(&'a self) -> BgColorDisplay<'a, BrightRed, Self>

Change the background color to bright red
§

fn bright_green<'a>(&'a self) -> FgColorDisplay<'a, BrightGreen, Self>

Change the foreground color to bright green
§

fn on_bright_green<'a>(&'a self) -> BgColorDisplay<'a, BrightGreen, Self>

Change the background color to bright green
§

fn bright_yellow<'a>(&'a self) -> FgColorDisplay<'a, BrightYellow, Self>

Change the foreground color to bright yellow
§

fn on_bright_yellow<'a>(&'a self) -> BgColorDisplay<'a, BrightYellow, Self>

Change the background color to bright yellow
§

fn bright_blue<'a>(&'a self) -> FgColorDisplay<'a, BrightBlue, Self>

Change the foreground color to bright blue
§

fn on_bright_blue<'a>(&'a self) -> BgColorDisplay<'a, BrightBlue, Self>

Change the background color to bright blue
§

fn bright_magenta<'a>(&'a self) -> FgColorDisplay<'a, BrightMagenta, Self>

Change the foreground color to bright magenta
§

fn on_bright_magenta<'a>(&'a self) -> BgColorDisplay<'a, BrightMagenta, Self>

Change the background color to bright magenta
§

fn bright_purple<'a>(&'a self) -> FgColorDisplay<'a, BrightMagenta, Self>

Change the foreground color to bright purple
§

fn on_bright_purple<'a>(&'a self) -> BgColorDisplay<'a, BrightMagenta, Self>

Change the background color to bright purple
§

fn bright_cyan<'a>(&'a self) -> FgColorDisplay<'a, BrightCyan, Self>

Change the foreground color to bright cyan
§

fn on_bright_cyan<'a>(&'a self) -> BgColorDisplay<'a, BrightCyan, Self>

Change the background color to bright cyan
§

fn bright_white<'a>(&'a self) -> FgColorDisplay<'a, BrightWhite, Self>

Change the foreground color to bright white
§

fn on_bright_white<'a>(&'a self) -> BgColorDisplay<'a, BrightWhite, Self>

Change the background color to bright white
§

fn bold<'a>(&'a self) -> BoldDisplay<'a, Self>

Make the text bold
§

fn dimmed<'a>(&'a self) -> DimDisplay<'a, Self>

Make the text dim
§

fn italic<'a>(&'a self) -> ItalicDisplay<'a, Self>

Make the text italicized
§

fn underline<'a>(&'a self) -> UnderlineDisplay<'a, Self>

Make the text italicized
Make the text blink
Make the text blink (but fast!)
§

fn reversed<'a>(&'a self) -> ReversedDisplay<'a, Self>

Swap the foreground and background colors
§

fn hidden<'a>(&'a self) -> HiddenDisplay<'a, Self>

Hide the text
§

fn strikethrough<'a>(&'a self) -> StrikeThroughDisplay<'a, Self>

Cross out the text
§

fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the foreground color at runtime. Only use if you do not know which color will be used at compile-time. If the color is constant, use either OwoColorize::fg or a color-specific method, such as OwoColorize::green, Read more
§

fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the background color at runtime. Only use if you do not know what color to use at compile-time. If the color is constant, use either OwoColorize::bg or a color-specific method, such as OwoColorize::on_yellow, Read more
§

fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the foreground color to a specific RGB value.
§

fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the background color to a specific RGB value.
§

fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>

Sets the foreground color to an RGB value.
§

fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>

Sets the background color to an RGB value.
§

fn style(&self, style: Style) -> Styled<&Self>

Apply a runtime-determined style
§

impl<T> Paint for T
where T: ?Sized,

§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling [Attribute] value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi [Quirk] value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the [Condition] value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new [Painted] with a default [Style]. Read more
§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> SectionExt for T
where T: Display + Send + Sync + 'static,

Source§

fn header<C>(self, header: C) -> IndentedSection<C, T>
where C: Display + Send + Sync + 'static,

Add a header to a Section and indent the body Read more
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> ToCompactString for T
where T: Display,

§

fn try_to_compact_string(&self) -> Result<CompactString, ToCompactStringError>

Fallible version of [ToCompactString::to_compact_string()] Read more
§

fn to_compact_string(&self) -> CompactString

Converts the given value to a [CompactString]. Read more
§

impl<T> ToLine for T
where T: Display,

§

fn to_line(&self) -> Line<'_>

Converts the value to a [Line].
§

impl<T> ToSpan for T
where T: Display,

§

fn to_span(&self) -> Span<'_>

Converts the value to a [Span].
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
§

impl<T> ToText for T
where T: Display,

§

fn to_text(&self) -> Text<'_>

Converts the value to a [Text].
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<T> ErasedDestructor for T
where T: 'static,

§

impl<T> MaybeSendSync for T

Layout§

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 80 bytes

Size for each variant:

  • NonceTooLow: 0 bytes
  • NonceTooHigh: 0 bytes
  • NonceMaxValue: 0 bytes
  • InsufficientFundsForTransfer: 0 bytes
  • MaxInitCodeSizeExceeded: 0 bytes
  • InsufficientFunds: 0 bytes
  • GasUintOverflow: 0 bytes
  • GasTooLow: 0 bytes
  • GasTooHigh: 24 bytes
  • TipAboveFeeCap: 0 bytes
  • FeeCapTooLow: 0 bytes
  • BasicOutOfGas: 24 bytes
  • Revert: 32 bytes
  • SenderNoEOA: 0 bytes
  • InvalidChainId: 0 bytes
  • IncompatibleEIP155: 0 bytes
  • AccessListNotSupported: 0 bytes
  • BlobFeeCapTooLow: 0 bytes
  • BlobVersionedHashesNotSupported: 0 bytes
  • MaxFeePerBlobGasNotSupported: 0 bytes
  • NoBlobHashes: 0 bytes
  • TooManyBlobs: 8 bytes
  • BlobTransactionValidationError: 72 bytes
  • BlobCreateTransaction: 0 bytes
  • BlobVersionNotSupported: 0 bytes
  • EmptyBlobs: 0 bytes
  • AuthorizationListNotSupported: 0 bytes
  • Revm: 24 bytes