Struct AccountStatus
pub struct AccountStatus(<AccountStatus as PublicFlags>::Internal);
Tuple Fields§
§0: <AccountStatus as PublicFlags>::Internal
Implementations§
§impl AccountStatus
impl AccountStatus
pub const Loaded: AccountStatus = _
pub const Loaded: AccountStatus = _
When account is loaded but not touched or interacted with. This is the default state.
pub const Created: AccountStatus = _
pub const Created: AccountStatus = _
When account is newly created we will not access database to fetch storage values
pub const SelfDestructed: AccountStatus = _
pub const SelfDestructed: AccountStatus = _
If account is marked for self destruction.
pub const Touched: AccountStatus = _
pub const Touched: AccountStatus = _
Only when account is marked as touched we will save it to database.
pub const LoadedAsNotExisting: AccountStatus = _
pub const LoadedAsNotExisting: AccountStatus = _
used only for pre spurious dragon hardforks where existing and empty were two separate states. it became same state after EIP-161: State trie clearing
pub const Cold: AccountStatus = _
pub const Cold: AccountStatus = _
used to mark account as cold
§impl AccountStatus
impl AccountStatus
pub const fn empty() -> AccountStatus
pub const fn empty() -> AccountStatus
Get a flags value with all bits unset.
pub const fn all() -> AccountStatus
pub const fn all() -> AccountStatus
Get a flags value with all known bits set.
pub const fn bits(&self) -> u8
pub const fn bits(&self) -> u8
Get the underlying bits value.
The returned value is exactly the bits set in this flags value.
pub const fn from_bits(bits: u8) -> Option<AccountStatus>
pub const fn from_bits(bits: u8) -> Option<AccountStatus>
Convert from a bits value.
This method will return None
if any unknown bits are set.
pub const fn from_bits_truncate(bits: u8) -> AccountStatus
pub const fn from_bits_truncate(bits: u8) -> AccountStatus
Convert from a bits value, unsetting any unknown bits.
pub const fn from_bits_retain(bits: u8) -> AccountStatus
pub const fn from_bits_retain(bits: u8) -> AccountStatus
Convert from a bits value exactly.
pub fn from_name(name: &str) -> Option<AccountStatus>
pub fn from_name(name: &str) -> Option<AccountStatus>
Get a flags value with the bits of a flag with the given name set.
This method will return None
if name
is empty or doesn’t
correspond to any named flag.
pub const fn intersects(&self, other: AccountStatus) -> bool
pub const fn intersects(&self, other: AccountStatus) -> bool
Whether any set bits in a source flags value are also set in a target flags value.
pub const fn contains(&self, other: AccountStatus) -> bool
pub const fn contains(&self, other: AccountStatus) -> bool
Whether all set bits in a source flags value are also set in a target flags value.
pub fn insert(&mut self, other: AccountStatus)
pub fn insert(&mut self, other: AccountStatus)
The bitwise or (|
) of the bits in two flags values.
pub fn remove(&mut self, other: AccountStatus)
pub fn remove(&mut self, other: AccountStatus)
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
remove
won’t truncate other
, but the !
operator will.
pub fn toggle(&mut self, other: AccountStatus)
pub fn toggle(&mut self, other: AccountStatus)
The bitwise exclusive-or (^
) of the bits in two flags values.
pub fn set(&mut self, other: AccountStatus, value: bool)
pub fn set(&mut self, other: AccountStatus, value: bool)
Call insert
when value
is true
or remove
when value
is false
.
pub const fn intersection(self, other: AccountStatus) -> AccountStatus
pub const fn intersection(self, other: AccountStatus) -> AccountStatus
The bitwise and (&
) of the bits in two flags values.
pub const fn union(self, other: AccountStatus) -> AccountStatus
pub const fn union(self, other: AccountStatus) -> AccountStatus
The bitwise or (|
) of the bits in two flags values.
pub const fn difference(self, other: AccountStatus) -> AccountStatus
pub const fn difference(self, other: AccountStatus) -> AccountStatus
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
difference
won’t truncate other
, but the !
operator will.
pub const fn symmetric_difference(self, other: AccountStatus) -> AccountStatus
pub const fn symmetric_difference(self, other: AccountStatus) -> AccountStatus
The bitwise exclusive-or (^
) of the bits in two flags values.
pub const fn complement(self) -> AccountStatus
pub const fn complement(self) -> AccountStatus
The bitwise negation (!
) of the bits in a flags value, truncating the result.
§impl AccountStatus
impl AccountStatus
pub const fn iter(&self) -> Iter<AccountStatus> ⓘ
pub const fn iter(&self) -> Iter<AccountStatus> ⓘ
Yield a set of contained flags values.
Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.
pub const fn iter_names(&self) -> IterNames<AccountStatus> ⓘ
pub const fn iter_names(&self) -> IterNames<AccountStatus> ⓘ
Yield a set of contained named flags values.
This method is like iter
, except only yields bits in contained named flags.
Any unknown bits, or bits not corresponding to a contained flag will not be yielded.
Trait Implementations§
§impl Binary for AccountStatus
impl Binary for AccountStatus
§impl BitAnd for AccountStatus
impl BitAnd for AccountStatus
§fn bitand(self, other: AccountStatus) -> AccountStatus
fn bitand(self, other: AccountStatus) -> AccountStatus
The bitwise and (&
) of the bits in two flags values.
§type Output = AccountStatus
type Output = AccountStatus
&
operator.§impl BitAndAssign for AccountStatus
impl BitAndAssign for AccountStatus
§fn bitand_assign(&mut self, other: AccountStatus)
fn bitand_assign(&mut self, other: AccountStatus)
The bitwise and (&
) of the bits in two flags values.
§impl BitOr for AccountStatus
impl BitOr for AccountStatus
§fn bitor(self, other: AccountStatus) -> AccountStatus
fn bitor(self, other: AccountStatus) -> AccountStatus
The bitwise or (|
) of the bits in two flags values.
§type Output = AccountStatus
type Output = AccountStatus
|
operator.§impl BitOrAssign for AccountStatus
impl BitOrAssign for AccountStatus
§fn bitor_assign(&mut self, other: AccountStatus)
fn bitor_assign(&mut self, other: AccountStatus)
The bitwise or (|
) of the bits in two flags values.
§impl BitXor for AccountStatus
impl BitXor for AccountStatus
§fn bitxor(self, other: AccountStatus) -> AccountStatus
fn bitxor(self, other: AccountStatus) -> AccountStatus
The bitwise exclusive-or (^
) of the bits in two flags values.
§type Output = AccountStatus
type Output = AccountStatus
^
operator.§impl BitXorAssign for AccountStatus
impl BitXorAssign for AccountStatus
§fn bitxor_assign(&mut self, other: AccountStatus)
fn bitxor_assign(&mut self, other: AccountStatus)
The bitwise exclusive-or (^
) of the bits in two flags values.
§impl Clone for AccountStatus
impl Clone for AccountStatus
§fn clone(&self) -> AccountStatus
fn clone(&self) -> AccountStatus
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read more§impl Debug for AccountStatus
impl Debug for AccountStatus
§impl Default for AccountStatus
impl Default for AccountStatus
§fn default() -> AccountStatus
fn default() -> AccountStatus
§impl<'de> Deserialize<'de> for AccountStatus
impl<'de> Deserialize<'de> for AccountStatus
§fn deserialize<__D>(
__deserializer: __D,
) -> Result<AccountStatus, <__D as Deserializer<'de>>::Error>where
__D: Deserializer<'de>,
fn deserialize<__D>(
__deserializer: __D,
) -> Result<AccountStatus, <__D as Deserializer<'de>>::Error>where
__D: Deserializer<'de>,
§impl Extend<AccountStatus> for AccountStatus
impl Extend<AccountStatus> for AccountStatus
§fn extend<T>(&mut self, iterator: T)where
T: IntoIterator<Item = AccountStatus>,
fn extend<T>(&mut self, iterator: T)where
T: IntoIterator<Item = AccountStatus>,
The bitwise or (|
) of the bits in each flags value.
Source§fn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)Source§fn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)§impl Flags for AccountStatus
impl Flags for AccountStatus
§const FLAGS: &'static [Flag<AccountStatus>] = _
const FLAGS: &'static [Flag<AccountStatus>] = _
§fn from_bits_retain(bits: u8) -> AccountStatus
fn from_bits_retain(bits: u8) -> AccountStatus
§fn from_bits_truncate(bits: Self::Bits) -> Self
fn from_bits_truncate(bits: Self::Bits) -> Self
§fn from_name(name: &str) -> Option<Self>
fn from_name(name: &str) -> Option<Self>
§fn iter_names(&self) -> IterNames<Self> ⓘ
fn iter_names(&self) -> IterNames<Self> ⓘ
§fn intersects(&self, other: Self) -> boolwhere
Self: Sized,
fn intersects(&self, other: Self) -> boolwhere
Self: Sized,
§fn contains(&self, other: Self) -> boolwhere
Self: Sized,
fn contains(&self, other: Self) -> boolwhere
Self: Sized,
§fn insert(&mut self, other: Self)where
Self: Sized,
fn insert(&mut self, other: Self)where
Self: Sized,
|
) of the bits in two flags values.§fn remove(&mut self, other: Self)where
Self: Sized,
fn remove(&mut self, other: Self)where
Self: Sized,
&!
). Read more§fn toggle(&mut self, other: Self)where
Self: Sized,
fn toggle(&mut self, other: Self)where
Self: Sized,
^
) of the bits in two flags values.§fn set(&mut self, other: Self, value: bool)where
Self: Sized,
fn set(&mut self, other: Self, value: bool)where
Self: Sized,
Flags::insert
] when value
is true
or [Flags::remove
] when value
is false
.§fn intersection(self, other: Self) -> Self
fn intersection(self, other: Self) -> Self
&
) of the bits in two flags values.§fn difference(self, other: Self) -> Self
fn difference(self, other: Self) -> Self
&!
). Read more§fn symmetric_difference(self, other: Self) -> Self
fn symmetric_difference(self, other: Self) -> Self
^
) of the bits in two flags values.§fn complement(self) -> Self
fn complement(self) -> Self
!
) of the bits in a flags value, truncating the result.§impl FromIterator<AccountStatus> for AccountStatus
impl FromIterator<AccountStatus> for AccountStatus
§fn from_iter<T>(iterator: T) -> AccountStatuswhere
T: IntoIterator<Item = AccountStatus>,
fn from_iter<T>(iterator: T) -> AccountStatuswhere
T: IntoIterator<Item = AccountStatus>,
The bitwise or (|
) of the bits in each flags value.
§impl Hash for AccountStatus
impl Hash for AccountStatus
§impl IntoIterator for AccountStatus
impl IntoIterator for AccountStatus
§type Item = AccountStatus
type Item = AccountStatus
§type IntoIter = Iter<AccountStatus>
type IntoIter = Iter<AccountStatus>
§fn into_iter(self) -> <AccountStatus as IntoIterator>::IntoIter
fn into_iter(self) -> <AccountStatus as IntoIterator>::IntoIter
§impl LowerHex for AccountStatus
impl LowerHex for AccountStatus
§impl Not for AccountStatus
impl Not for AccountStatus
§fn not(self) -> AccountStatus
fn not(self) -> AccountStatus
The bitwise negation (!
) of the bits in a flags value, truncating the result.
§type Output = AccountStatus
type Output = AccountStatus
!
operator.§impl Octal for AccountStatus
impl Octal for AccountStatus
§impl Ord for AccountStatus
impl Ord for AccountStatus
§impl PartialEq for AccountStatus
impl PartialEq for AccountStatus
§impl PartialOrd for AccountStatus
impl PartialOrd for AccountStatus
§impl Serialize for AccountStatus
impl Serialize for AccountStatus
§fn serialize<__S>(
&self,
__serializer: __S,
) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>where
__S: Serializer,
fn serialize<__S>(
&self,
__serializer: __S,
) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>where
__S: Serializer,
§impl Sub for AccountStatus
impl Sub for AccountStatus
§fn sub(self, other: AccountStatus) -> AccountStatus
fn sub(self, other: AccountStatus) -> AccountStatus
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
difference
won’t truncate other
, but the !
operator will.
§type Output = AccountStatus
type Output = AccountStatus
-
operator.§impl SubAssign for AccountStatus
impl SubAssign for AccountStatus
§fn sub_assign(&mut self, other: AccountStatus)
fn sub_assign(&mut self, other: AccountStatus)
The intersection of a source flags value with the complement of a target flags value (&!
).
This method is not equivalent to self & !other
when other
has unknown bits set.
difference
won’t truncate other
, but the !
operator will.
§impl UpperHex for AccountStatus
impl UpperHex for AccountStatus
impl Copy for AccountStatus
impl Eq for AccountStatus
impl StructuralPartialEq for AccountStatus
Auto Trait Implementations§
impl Freeze for AccountStatus
impl RefUnwindSafe for AccountStatus
impl Send for AccountStatus
impl Sync for AccountStatus
impl Unpin for AccountStatus
impl UnwindSafe for AccountStatus
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit
)§impl<Q, K> Comparable<K> for Q
impl<Q, K> Comparable<K> for Q
§impl<T> Conv for T
impl<T> Conv for T
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
key
and return true
if they are equal.§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Source§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
Source§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
key
and return true
if they are equal.§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self
to use its Binary
implementation when Debug
-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self
to use its Display
implementation when
Debug
-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self
to use its LowerExp
implementation when
Debug
-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self
to use its LowerHex
implementation when
Debug
-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self
to use its Octal
implementation when Debug
-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self
to use its Pointer
implementation when
Debug
-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self
to use its UpperExp
implementation when
Debug
-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self
to use its UpperHex
implementation when
Debug
-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> IntoRequest<T> for T
impl<T> IntoRequest<T> for T
Source§fn into_request(self) -> Request<T>
fn into_request(self) -> Request<T>
T
in a tonic::Request
§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling [Attribute
] value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
[Quirk
] value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the [Condition
] value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self
, then passes self.as_ref()
into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self
, then passes self.as_mut()
into the pipe
function.§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self
, then passes self.deref()
into the pipe function.§impl<T> Pointable for T
impl<T> Pointable for T
§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B>
of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B>
of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R>
view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R>
view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target
of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target
of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap()
only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut()
only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow()
only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref()
only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut()
only in debug builds, and is erased in release
builds.§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref()
only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<T> WithSubscriber for T
impl<T> WithSubscriber for T
§fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘwhere
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘwhere
S: Into<Dispatch>,
§fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ
fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ
impl<T> DeserializeOwned for Twhere
T: for<'de> Deserialize<'de>,
impl<T> RpcObject for Twhere
T: RpcParam + RpcReturn,
impl<T> RpcParam for T
impl<T> RpcReturn for T
Layout§
Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...)
attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.
Size: 1 byte