FoundryNetwork

Struct FoundryNetwork 

Source
pub struct FoundryNetwork {
    _private: (),
}
Expand description

Foundry network type.

This network type supports Foundry-specific transaction types, including op-stack deposit transactions, alongside standard Ethereum transaction types.

Note: This is a basic implementation (“for now”) that provides the core Network trait definitions. Full Foundry-specific RPC types will be implemented in future work. Currently, this uses Ethereum’s Network configuration as a compatibility layer.

Fields§

§_private: ()

Trait Implementations§

Source§

impl Clone for FoundryNetwork

Source§

fn clone(&self) -> FoundryNetwork

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for FoundryNetwork

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Network for FoundryNetwork

Source§

type TxType = FoundryTxType

The network transaction type enum. Read more
Source§

type TxEnvelope = FoundryTxEnvelope

The network transaction envelope type.
Source§

type UnsignedTx = FoundryTypedTx

An enum over the various transaction types.
Source§

type ReceiptEnvelope = FoundryReceiptEnvelope

The network receipt envelope type.
Source§

type Header = Header

The network header type.
Source§

type TransactionRequest = FoundryTransactionRequest

The JSON body of a transaction request.
Source§

type TransactionResponse = Transaction<FoundryTxEnvelope>

The JSON body of a transaction response.
Source§

type ReceiptResponse = FoundryTxReceipt

The JSON body of a transaction receipt.
Source§

type HeaderResponse = Header

The JSON body of a header response.
Source§

type BlockResponse = Block<<FoundryNetwork as Network>::TransactionResponse, <FoundryNetwork as Network>::HeaderResponse>

The JSON body of a block response.
Source§

impl TransactionBuilder<FoundryNetwork> for FoundryTransactionRequest

Source§

fn chain_id(&self) -> Option<ChainId>

Get the chain ID for the transaction.
Source§

fn set_chain_id(&mut self, chain_id: ChainId)

Set the chain ID for the transaction.
Source§

fn nonce(&self) -> Option<u64>

Get the nonce for the transaction.
Source§

fn set_nonce(&mut self, nonce: u64)

Set the nonce for the transaction.
Source§

fn take_nonce(&mut self) -> Option<u64>

Takes the nonce out of the transaction, clearing it.
Source§

fn input(&self) -> Option<&Bytes>

Get the input data for the transaction.
Source§

fn set_input<T: Into<Bytes>>(&mut self, input: T)

Set the input data for the transaction.
Source§

fn set_input_kind<T: Into<Bytes>>( &mut self, input: T, kind: TransactionInputKind, )

Set the input data for the transaction, respecting the input kind
Source§

fn from(&self) -> Option<Address>

Get the sender for the transaction.
Source§

fn set_from(&mut self, from: Address)

Set the sender for the transaction.
Source§

fn kind(&self) -> Option<TxKind>

Get the kind of transaction.
Source§

fn clear_kind(&mut self)

Clear the kind of transaction.
Source§

fn set_kind(&mut self, kind: TxKind)

Set the kind of transaction.
Source§

fn value(&self) -> Option<U256>

Get the value for the transaction.
Source§

fn set_value(&mut self, value: U256)

Set the value for the transaction.
Source§

fn gas_price(&self) -> Option<u128>

Get the legacy gas price for the transaction.
Source§

fn set_gas_price(&mut self, gas_price: u128)

Set the legacy gas price for the transaction.
Source§

fn max_fee_per_gas(&self) -> Option<u128>

Get the max fee per gas for the transaction.
Source§

fn set_max_fee_per_gas(&mut self, max_fee_per_gas: u128)

Set the max fee per gas for the transaction.
Source§

fn max_priority_fee_per_gas(&self) -> Option<u128>

Get the max priority fee per gas for the transaction.
Source§

fn set_max_priority_fee_per_gas(&mut self, max_priority_fee_per_gas: u128)

Set the max priority fee per gas for the transaction.
Source§

fn gas_limit(&self) -> Option<u64>

Get the gas limit for the transaction.
Source§

fn set_gas_limit(&mut self, gas_limit: u64)

Set the gas limit for the transaction.
Source§

fn access_list(&self) -> Option<&AccessList>

Get the EIP-2930 access list for the transaction.
Source§

fn set_access_list(&mut self, access_list: AccessList)

Sets the EIP-2930 access list.
Source§

fn complete_type(&self, ty: FoundryTxType) -> Result<(), Vec<&'static str>>

Check if all necessary keys are present to build the specified type, returning a list of missing keys.
Source§

fn can_submit(&self) -> bool

True if the builder contains all necessary information to be submitted to the eth_sendTransaction endpoint.
Source§

fn can_build(&self) -> bool

True if the builder contains all necessary information to be built into a valid transaction.
Source§

fn output_tx_type(&self) -> FoundryTxType

Returns the transaction type that this builder will attempt to build. This does not imply that the builder is ready to build.
Source§

fn output_tx_type_checked(&self) -> Option<FoundryTxType>

Returns the transaction type that this builder will build. None if the builder is not ready to build.
Source§

fn prep_for_submission(&mut self)

Trim any conflicting keys and populate any computed fields (like blob hashes). Read more
Source§

fn build_unsigned(self) -> BuildResult<FoundryTypedTx, FoundryNetwork>

Build an unsigned, but typed, transaction.
Source§

async fn build<W: NetworkWallet<FoundryNetwork>>( self, wallet: &W, ) -> Result<FoundryTxEnvelope, TransactionBuilderError<FoundryNetwork>>

Build a signed transaction.
§

fn with_chain_id(self, chain_id: u64) -> Self

Builder-pattern method for setting the chain ID.
§

fn with_nonce(self, nonce: u64) -> Self

Builder-pattern method for setting the nonce.
§

fn without_nonce(self) -> Self

Takes the nonce out of the transaction, clearing it.
§

fn with_input<T>(self, input: T) -> Self
where T: Into<Bytes>,

Builder-pattern method for setting the input data.
§

fn with_input_kind<T>(self, input: T, kind: TransactionInputKind) -> Self
where T: Into<Bytes>,

Builder-pattern method for setting the input data, respecting the input kind
§

fn with_from(self, from: Address) -> Self

Builder-pattern method for setting the sender.
§

fn with_kind(self, kind: TxKind) -> Self

Builder-pattern method for setting the kind of transaction.
§

fn to(&self) -> Option<Address>

Get the recipient for the transaction.
§

fn set_to(&mut self, to: Address)

Set the recipient for the transaction.
§

fn with_to(self, to: Address) -> Self

Builder-pattern method for setting the recipient.
§

fn set_create(&mut self)

Set the to field to a create call.
§

fn into_create(self) -> Self

Set the to field to a create call.
§

fn set_deploy_code<T>(&mut self, code: T)
where T: Into<Bytes>,

Deploy the code by making a create call with data. This will set the to field to [TxKind::Create].
§

fn with_deploy_code<T>(self, code: T) -> Self
where T: Into<Bytes>,

Deploy the code by making a create call with data. This will set the to field to [TxKind::Create].
§

fn set_call<T>(&mut self, t: &T)
where T: SolCall,

Set the data field to a contract call. This will clear the to field if it is set to [TxKind::Create].
§

fn with_call<T>(self, t: &T) -> Self
where T: SolCall,

Make a contract call with data.
§

fn calculate_create_address(&self) -> Option<Address>

Calculates the address that will be created by the transaction, if any. Read more
§

fn with_value(self, value: Uint<256, 4>) -> Self

Builder-pattern method for setting the value.
§

fn with_gas_price(self, gas_price: u128) -> Self

Builder-pattern method for setting the legacy gas price.
§

fn with_max_fee_per_gas(self, max_fee_per_gas: u128) -> Self

Builder-pattern method for setting max fee per gas .
§

fn with_max_priority_fee_per_gas(self, max_priority_fee_per_gas: u128) -> Self

Builder-pattern method for setting max priority fee per gas.
§

fn with_gas_limit(self, gas_limit: u64) -> Self

Builder-pattern method for setting the gas limit.
§

fn with_access_list(self, access_list: AccessList) -> Self

Builder-pattern method for setting the access list.
§

fn complete_preferred(&self) -> Result<(), Vec<&'static str>>

Check if all necessary keys are present to build the currently-preferred transaction type, returning a list of missing keys.
§

fn assert_preferred(&self, ty: <N as Network>::TxType)

Assert that the builder prefers a certain transaction type. This does not indicate that the builder is ready to build. This function uses a dbg_assert_eq! to check the builder status, and will have no affect in release builds.
§

fn assert_preferred_chained(self, ty: <N as Network>::TxType) -> Self

Assert that the builder prefers a certain transaction type. This does not indicate that the builder is ready to build. This function uses a dbg_assert_eq! to check the builder status, and will have no affect in release builds.
§

fn apply<F>(self, f: F) -> Self
where F: FnOnce(Self) -> Self,

Apply a function to the builder, returning the modified builder.
§

fn try_apply<F, E>(self, f: F) -> Result<Self, E>
where F: FnOnce(Self) -> Result<Self, E>,

Apply a fallible function to the builder, returning the modified builder or an error.
Source§

impl Copy for FoundryNetwork

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
Source§

impl<T> DynClone for T
where T: Clone,

§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<TxEnv, T> FromRecoveredTx<&T> for TxEnv
where TxEnv: FromRecoveredTx<T>,

§

fn from_recovered_tx(tx: &&T, sender: Address) -> TxEnv

Builds a [TxEnv] from a transaction and a sender address.
§

impl<TxEnv, T> FromTxWithEncoded<&T> for TxEnv
where TxEnv: FromTxWithEncoded<T>,

§

fn from_encoded_tx(tx: &&T, sender: Address, encoded: Bytes) -> TxEnv

Builds a [TxEnv] from a transaction, its sender, and encoded transaction bytes.
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more

Layout§

Note: Most layout information is completely unstable and may even differ between compilations. The only exception is types with certain repr(...) attributes. Please see the Rust Reference's “Type Layout” chapter for details on type layout guarantees.

Size: 0 bytes